Classic dildo mould

smiffy

Classic shape dildo mould with large flat base for easy 3D printing.
There is a left hand side and right hand side mould, both must be printed.
To align the two halves, print the pegs and the whole assembly will snap together.

Print in PLA as this does not warp or shrink, then lightly sand the inside surfaces.
Add a release agent, insert the pegs and assemble the mould ready for casting.

Only use a flexible silicone cast material as there is a very slight undercut which is unavoidable on this shape.

Dimensions:
Makes a classic shape dildo 6.75 inch with girth 5.5 inch.

Share for a discount

Simply share this and a discount will be applied to your purchase at checkout.

Share onShare on FacebookTweet about this on TwitterShare on Google+Share on LinkedIn