The Shop of Designer smiffy

Speculum device This is a 3D printer challenge due to the complex shape, will require support structures. Use a strong filament. Comes in three files; top, bottom and fittings. M4 bolts could be used instead of printing the fittings. Dimensions: Length approx. 135 mm Diameter approx. 35 mm

Smooth lines and no steep angles means this can be printed without support. Image shows 3D print using green flexible PLA with the following settings: 8 top solid layers 8 bottom solid layers 4 outline/perimeter shells 15% infill This seems to have a good combination of strength and pliability. Dimensions:…

Classic shape dildo mould with large flat base for easy 3D printing. There is a left hand side and right hand side mould, both must be printed. To align the two halves, print the pegs and the whole assembly will snap together. Print in PLA as this does not warp…

Moderately realistic in dimensions and shape with classic smooth lines. Can be scaled to fit printer, prints vertically without support or horizontally with support. Print tested in PLA with PVA support (horizontal) and PLA / PET (vertical). Dimensions: Length is 6.75" Girth is 5.5"