Anal Beads


Material: PLA – 22.65 grams ( 0.05 lbs)
Resolution: 0.20mm
Layers: 129 layers Rafts: Yes Supports: No
Print Time: 2 hr 25 min
Function: Prints 1:1 as four 25.4 mm (1″) balls with press fit string retention pieces and a pull ring. Use a 685 mm (27″) string with these parts (I used a show string and then clipped the hard tips or “aglets” off after the string was secured).

99.765 mm (3.928″) x 56.897 mm (2.240″) x 24.611 mm (.969″)

Share onShare on FacebookTweet about this on TwitterShare on Google+Share on LinkedIn