SLUT Paddle

unknownecstasy

Make sure to leave your mark with every swat! Available is both the 1 piece and the 2 piece version. The 2 piece should be glued after print and will require supports for the joining pegs. Scale accordingly with your favorite slicing program! Dimensions: 12.126″ x 5.6″

Lockable Ankle Cuff, Very secure !

Depraved_Eros

This will make an oval shaped cuff, sized for a mens ankle. (3.5 x 3) Scale down to make smaller for other sizes. This is a whopping 1.5 inches wide, and 3/4th thick cuff, if it was made of metal would weigh over 30 lbs! But with a mere 40% …

Updated Wrist Cuff, Locking

Depraved_Eros

This is an upgraded design which features an internal locking system, beveled edges inside and out, and now locks on the side, rather than the middle.  This is the first part of a new printable system that will let you create some very interesting pieces that connect together.  Cuff is …

Flog

SexCadPro

File: Flogger.STL Name: Flogger – Cat ‘o Eight Tails – Notes Material: 23.88 grams ( 0.053 lbs) – Infill = 12% Size: 129.2 mm (5.087″) x 38.66 mm (1.522″) x 16.51 mm (0.650″) Resolution: 0.20mm Layers: 89 layers Rafts: Yes Supports: No Print Time: 2 hr 21 min Function: If …

Lockable Wrist Cuff, 50 Shades of BDSM

Depraved_Eros

This will produce a Wrist Cuff for B&D play. It is very hardy, can be locked with a small padlock and will stand up to a surprising amount of pressure. the cuff is 2.5in x 2in Oval shape and is a whopping 1.5in tall, giving it a real Heavy Shackle …

Collar

SexCadPro

File: Collar.STL Name: Collar Material: 66.15 grams ( 0.146 lbs) Infill =12% Size: 194.31 mm (7.650″) x 139.32 mm (5.485″) x 38.1 mm (1.5″) Resolution: 0.20mm Layers: 197 layers Rafts: Yes Supports: No Print Time: 7 hr 34 min Function: If printed 1:1, this produces a 5″ diameter collar intended …

Cuffs

SexCadPro

A simple to print old timey wrist or ankle cuff. This is actually only two different parts – one is printed 4 times, and one is printed twice. This assembly, if printed 1:1, is 7.4″ (188 mm) long and 3.4″ (87mm) wide and will accommodate about 1.9″ (48 mm) body …

Ball Gag

SexCadPro

A nice simple 1.75″ (44.45 mm) hollow ball gag with plenty of air (drool) holes. If printed 1:1, it will allow up to 0.8″ wide strap to pass through. This was printed using PLA (remember ABS can be toxic) using a raft (remember it is a round ball), with the …

Kinky Sub Collar

Pierrimus

This cosplay item allows you to act out your submissive/dominant fantasy. It should be printed at .2 mm layer height with supports and bridging turned off. Suggest using a raft as well so the supports on the spikes have good adherence on the build. Collar’s inner diameter is 126 mm …