A simple to print old timey wrist or ankle cuff. This is actually only two different parts – one is printed 4 times, and one is printed twice. This assembly, if printed 1:1, is 7.4″ (188 mm) long and 3.4″ (87mm) wide and will accommodate about 1.9″ (48 mm) body parts. The assembly will require 6 bolts and 6 nuts. If printed 1:1 then the bolts can me M5x40 or #10 x 1.5″. The .STL is ready to print with the correct number of parts and takes about 6 hours and 33 minutes with 133 layers with about 60.3 grams (.133 pounds) of material. This part was printed with rafts, layer size of 0.20mm, and no supports.

7.4″ (188 mm) x 3.4″ (87mm) x 1.0″ (25.4)