Mold for Pacifier (Dummy)


File: Mold Print.STL
Name: Mold for Pacifier (Dummy)
PLA Material: 33.5 grams ( 0.074 lbs) – Infill = 10%
Size: 94.44 mm (3.72″) x 48.26 mm (1.9″) x 33.02 mm (1.3″)
Resolution: 0.20mm
Layers: 171 layers Rafts: Yes Supports: No
Print Time: 3 hr 1 min
Function: This prints a mold for a pacifier (dummy). The bottom mold has two posts. The top mold has a hole and slot. Intended to be printed 1:1 but can be printed at almost any scale. If printed 1:1 there is a 4.76mm (0.1875″) fill hole.

94.44 mm (3.72″) x 48.26 mm (1.9″) x 33.02 mm (1.3″)

Share onShare on FacebookTweet about this on TwitterShare on Google+Share on LinkedIn