This mold should produce a Long John that is about 31mm (1.25in) in diameter and about 210mm (8.4in) long if filled right up to the top. the best way to print this should be laying down, the lower the z height while printing the smoother the mold will turn out. The pins are included in the file and should print to a push fit. Using the pins with rubber bands to hold this mold while pouring would be the best way to hold it together.
Each side of this mold fits on a 220mm X 220mm bed when it is turned at 45 degrees.
each side of the Mold are 650mm X 220mm X 25mm
whole mold assembled 650mm X 220mm X 50mm