The Shop of Designer Barol

Very simple chastity cage, that should be tight for normal sized guys. Besides the cage I added three sizes of “ball holder” so you can print the fitting one for you. The cage gets secured with two 10mm m3 screws and two nuts (or an imperial equivalent), so no lock…

You can either print both halves and glue them together or print the full model, but you might need some support then. A flexible filament is good for that task. Dimensions: 34mm inner diameter Other sizes: Small 50mm inner diameter: Medium 42mm inner diameter:

You can either print both halves and glue them together or print the full model, but you might need some support then. A flexible filament is good for that task. Dimensions: 42mm inner diameter Other sizes: Small 34mm inner diameter: Big 50mm inner diameter:

You can either print both halves and glue them together or print the full model, but you might need some support then. A flexible filament is good for that task. Dimensions: 50mm inner diameter Other sizes: Small 34mm inner diameter: Medium 42mm inner diameter:

print upright. Dimensions: Height: 92mm Diameter: 5,6cm Volume: 133cm3

If you want to play with fluids or air try this. print upright. Dimensions: Height: 140mm Diameter: 30mm Volume: 112cm3 Hole diameter: 5mm

print upright Dimensions: Height: 140mm Diameter: 30mm Volume: 115cm3

Print upright, no need for support material Dimensions: Small: - height: 105mm - biggest diameter: about 20mm - volume: 23cm3 Medium: - height: 115mm - biggest diameter: about 25mm - volume: 39cm3 Big: - height: 125mm - biggest diameter: about 28mm - volume: 42cm3 XXL: - height: 152mm - biggest…

Add to Cart

This is a mold for Butt Plug. Print two of those. Clean and sand! Use a release agent! Use M5 rod (about 70mm long)and nuts for clamping mold parts together. This will keep everything aligned and closed. Dimensions: Mold outer dimensions: 10,5cm x 7cm x 3cm Plug Dimensions: Volume: about…